AC/DC CLAMP METER CM4376 (Bluetooth®)
Kategori: Clamp Meters
Fitur Utama • Mudah masuk ke ruang sempit antar kabel berkat struktur sensor yang tipis • Ukur hingga 1000 A • Fungsi AC / DC otomatis membantu meningkatkan efisiensi kerja • Ukur tegangan DC hingga 1700 V (* 1) • Secara simultan mengukur arus masuk dalam RMS dan nilai puncak • Kisaran suhu operasi -25 ° C hingga 65 ° C yang diperluas • Kirim meas
Hioki CM4376 AC/DC Clamp Meter
Hioki clamp on meter adalah alat pengukur terbaik di kelasnya yang menggabungkan keahlian Hioki dalam teknologi sensor saat ini. Hioki CM4376 adalah Tang Amper True RMS True AC A 1000A yang menampilkan rahang ramping berdesain unik yang memungkinkan Anda dengan mudah masuk ke celah sempit antara kabel dalam kotak distribusi listrik yang padat tanpa takut merusak kabel atau meter penjepit. Kisaran suhu operasi -25 ℃ hingga 65 ℃ yang luas dan penutup tahan debu dan tahan air IP54 untuk memungkinkan para profesional bekerja den yang luasgan cepat dalam situasi yang menantang termasuk pengembangan, perbaikan, dan pemeliharaan peralatan dan perangkat seperti kendaraan listrik.
Selain itu, kemampuan pengukuran DC tegangan tinggi hingga 1700 V (* 1) sangat ideal untuk inspeksi perawatan penjepit peralatan listrik dan tenaga surya. Akhirnya, teknologi nirkabel Bluetooth built-in memungkinkan Anda mengirim nilai yang terukur ke smartphone atau tablet, menampilkan bentuk gelombang secara real time, dan membuat laporan tepat di lokasi.
Basic specifications
| DC Current range | 1000 A, (Max. display 999.9 A) , Basic accuracy: ±1.3% rdg. ±0.3 A (at 30.1 A – 999.9 A) |
|---|---|
| AC Current range | 1000 A (Max. display 999.9 A, 10 Hz to 1 kHz, True RMS), Basic accuracy 45-66 Hz: ±1.3% rdg. ±0.3 A (at 30.1 A – 900.0 A) |
| Crest factor | 1.5 |
| DC+AC Current range | 1000 A (DC, 10 Hz to 1 kHz, True RMS), Basic accuracy DC, 45-66 Hz: ±1.3% rdg. ±1.3 A (at 30.1 A – 900.0 A) |
| DC Power range | 0.0 VA to 1700 kVA (Automatically switched based on voltage range), Basic accuracy: ±2.0% rdg. ±20 dgt. |
| DC Voltage range | 600.0 mV to 1500 V (*1), 5 ranges, Basic accuracy: ±0.5% rdg. ±0.5 mV (at 600 mV) |
| AC Voltage range | 6.000 V to 1000 V, 5 ranges (15 Hz to 1 kHz, True RMS), Basic accuracy 45 – 66 Hz: ±0.9% rdg. ±0.013 V (at 6 V) |
| DC+AC Voltage range | 6.000 V to 1000 V, 5 ranges, Basic accuracy DC, 45-66 Hz: ±1.0% rdg. ±0.023 V (at 6 V) |
| Resistance range | 600.0 Ω to 600.0 kΩ, 4 ranges, Basic accuracy: ±0.7% rdg. ±0.5 Ω (at 600 Ω) |
| Electrostatic capacity range | 1.000 μF to 1000 μF, 4 ranges, Basic accuracy: ±1.9% rdg. ±0.005 μF (at 1 μF) |
| Frequency range | 9.999 Hz to 999.9 Hz, 3 ranges, Basic accuracy: ±0.1% rdg. ±0.003 Hz (at 9.999 Hz) |
| Temperature (K) | -40.0 to 400.0 ˚C, add temperature probe accuracy to basic accuracy of ±0.5% rdg. ±3.0 ˚C |
| Other functions | Automatic AC/ DC detection, DC current and DC voltage polarity detection function, MAX/ MIN/ AVG/ PEAK MAX/ PEAK MIN value display, Low-pass filter function, Display value hold, Auto hold, Backlight, Auto power save, Buzzer sound, Zero-adjustment |
| Dustproof, waterproof | IP54 (Storage or measurement of current of an insulated conductor) |
| Interface | Bluetooth® 4.0LE, Supported devices: iOS, Android™ smartphone/tablet GENNECT Cross (free downloadable app) : display measured values and waveforms, or other |
| Power supply | LR03 Alkaline battery ×2, Continuous use: 40 hr (Backlight OFF, Bluetooth® OFF), 20 hr (Backlight OFF, Bluetooth® ON) |
| Core jaw diameter | φ34 mm (1.34 in) |
| Smallest dimension of jaw cross-section | 9.5 mm (0.37 in) (Range value of 44 mm (1.73 in) from the tip of the jaw) |
| Dimensions and mass | 65 mm (2.56 in) W × 242 mm (9.53 in) H × 35 mm (1.38 in) D mm, 330 g (11.6 oz) |
| Accessories | TEST LEAD L9207-10, CARRYING CASE C0203, LR03 Alkaline battery ×2, Instruction Manual ×1, CM4376: Precautions Concerning Use of Equipment that Emits Radio Waves ×1 |
CAT IV 600 V | CAT III 1000 V
* 1 Instrumen Anda dapat digunakan untuk mengukur voltase yang melebihi 1000 V DC jika dan hanya jika kedua kondisi berikut terpenuhi:
- Rangkaian yang sedang diukur terisolasi dari jaringan listrik komersial.
- Rangkaian yang diukur terisolasi dari tanah.
Produk Terkait
NON-CONTACT CAN SENSOR SP7001, SP7002
Key Features Acquire CAN FD/CAN data immediately, simply by pinching probes over wire insulation with one-hand Eliminate concerns by using non-contact sensing technology Use in a diverse array of development and evaluation applications that demand reliability
DIFFERENTIAL PROBE P9000
• Probe kompak untuk lingkungan CAT III 1000V • Mode gelombang: Mengamati bentuk gelombang sesaat • Mode RMS: Amati bentuk gelombang nilai RMS • Area penggunaan utama 1. Sirkuit baterai tegangan tinggi pada EV, HEV, dan mobil lain 2. Sirkuit bertegangan tinggi pada peralatan terkait energi seperti sel fotovoltaik 3. Sirkuit saluran listrik komersial (480 Vrms, dll.) 4. Suara lonjakan tegangan tinggi dari inverter, motor, solenoida, dll.
AC FLEXIBLE CURRENT SENSOR CT9667
Key Features Thinner cables are easy to use in confined spaces and with complicated wiring (-01, -02) Shaped so that it’s easy to route through complex wiring Easily supports large current measurements up to 5000 A Wide 10 Hz to 20 kHz band with excellent frequency characteristics Choose from three conductor diameter sizes Combine with Hioki power meters or Memory HiCorders (with BNC input terminals)
AC/DC CURRENT SENSOR CT6877
Key Features Combined accuracy with HIOKI power analyzer PW8001, PW6001 and PW3390 is specified. For details of combined accuracy, refer to the instruction manual. Measures high-current up to 2000 A for EV, HEV and other electric vehicles Improved noise resistance performance through a stronger shield lets you accurately measure current buried in noise High accuracy measurement realized through flat frequency characteristics and CMRR performance More enhanced environmental resistance performance than ever before lets you measure in -40 to 85°C situations Superior frequency characteristics of DC to 1 MHz (amplitude) Meet a wide range of applications from measuring battery charge/discharge to the secondary side of inverters in photovoltaic power generation and fuel cell evaluation, etc. Monitor waveforms when paired with oscilloscopes or Memory HiCorders and Sensor Unit