AC/DC CURRENT SENSOR CT6873
Kategori: Probes Sensors
Key Features Combined accuracy with HIOKI power analyzer PW8001, PW6001 and PW3390 is specified. For details of combined accuracy, refer to the instruction manual. Wide-bandwidth DC to 10 MHz excellent frequency characteristics. Applications in the fields of electric and hybrid electric vehicles. Wide operating temperature range(-40°C to 85°C) fit for automobile applications. Ideal for evaluation of solar power generation and fuel cells to measure battery charge and discharge and the secondary side of inverters. For observing waveforms to be used with the oscilloscopes or Memory HiCorders (use with Sensor Unit).
Basic specifications
Accuracy guaranteed: 1 year
| Rated current | 200 A AC/DC |
|---|---|
| Max. allowable input | Within the derating range, up to ±420 A peak (design value) allowed at 40°C or less for 20 ms or less |
| Frequency bandwidth | Amplitude: DC to 10 MHz Phase: DC to 1 MHz |
| Basic accuracy | DC (±0.03% rdg. ±0.002% f.s., no phase specification) 45 Hz ≤ f ≤ 66 Hz (±0.03% rdg. ±0.007% f.s., ±0.05°) Specified up to 1 MHz |
| Output voltage rate | 10 mV/A rated (This device outputs AC+DC voltage via the Sensor Unit) |
| Max. rated voltage to earth | 1000 V CAT III |
| Core diameter | φ 24 mm (0.94 in) |
| Operating temperature, humidity | -40°C to +85°C (-40°F to 185°F), 80% RH or less (with no condensation) |
| Power supply | Power suppled via the Power Analyzer PW8001, PW6001, PW3390, Sensor Unit CT9555, CT9556, CT9557, or 3CH CURRENT UNIT U8977 |
| Max. rated power | 6 VA max. (at 200 A/55 Hz, ±12 V power requirement) |
| Dimensions and mass | 70 mm (2.76 in)W × 100 mm (3.94 in)H × 53 mm (2.09 in)D, CT6873: 370 g (13.1 oz), cable length: 3 m (9.84 ft), CT6873-01: 690g (24.3 oz), cable length 10 m (32.81 ft) |
| Included accessories | Instruction Manual ×1, Mark bands ×6, Operating Precautions ×1 |
Compatible models
| Compatible models | CT6873 |
|---|---|
| Power Analyzer PW8001, PW6001, PW3390 | OK |
| Power Analyzer 3390 | Attention (Requires CT9901) |
| Power HiTester 3193 series | Attention (Requires CT9901) |
| Current Unit 8971 | Attention (Requires the 9318, CT9901) |
| 3CH Current Unit U8977 | OK |
Produk Terkait
NON-CONTACT CAN SENSOR SP7001, SP7002
Key Features Acquire CAN FD/CAN data immediately, simply by pinching probes over wire insulation with one-hand Eliminate concerns by using non-contact sensing technology Use in a diverse array of development and evaluation applications that demand reliability
DIFFERENTIAL PROBE P9000
• Probe kompak untuk lingkungan CAT III 1000V • Mode gelombang: Mengamati bentuk gelombang sesaat • Mode RMS: Amati bentuk gelombang nilai RMS • Area penggunaan utama 1. Sirkuit baterai tegangan tinggi pada EV, HEV, dan mobil lain 2. Sirkuit bertegangan tinggi pada peralatan terkait energi seperti sel fotovoltaik 3. Sirkuit saluran listrik komersial (480 Vrms, dll.) 4. Suara lonjakan tegangan tinggi dari inverter, motor, solenoida, dll.
AC FLEXIBLE CURRENT SENSOR CT9667
Key Features Thinner cables are easy to use in confined spaces and with complicated wiring (-01, -02) Shaped so that it’s easy to route through complex wiring Easily supports large current measurements up to 5000 A Wide 10 Hz to 20 kHz band with excellent frequency characteristics Choose from three conductor diameter sizes Combine with Hioki power meters or Memory HiCorders (with BNC input terminals)
AC/DC CURRENT SENSOR CT6877
Key Features Combined accuracy with HIOKI power analyzer PW8001, PW6001 and PW3390 is specified. For details of combined accuracy, refer to the instruction manual. Measures high-current up to 2000 A for EV, HEV and other electric vehicles Improved noise resistance performance through a stronger shield lets you accurately measure current buried in noise High accuracy measurement realized through flat frequency characteristics and CMRR performance More enhanced environmental resistance performance than ever before lets you measure in -40 to 85°C situations Superior frequency characteristics of DC to 1 MHz (amplitude) Meet a wide range of applications from measuring battery charge/discharge to the secondary side of inverters in photovoltaic power generation and fuel cell evaluation, etc. Monitor waveforms when paired with oscilloscopes or Memory HiCorders and Sensor Unit