CAN UNIT U8555
Kategori: Data Loggers_HiLogger
Key Features CAN/CAN FD input and output switchable Max. sampling 10 ms (up to 50 ch) Up to 500 ch measurement (at 100 ms)
Basic specifications
| Connectable instruments | Memory HiLogger LR8450 (Designed for use with plug-in units only) Memory HiLogger LR8450-01 (Wireless LAN model) | |||||
|---|---|---|---|---|---|---|
| Operating temperature and humidity | -10°C to 50°C, 80% RH or less (no condensation) | |||||
| Storage temperature and humidity | -20°C to 60°C, 80% RH or less (no condensation) | |||||
| Vibration resistance | JIS D 1601:1995 5.3(1), Class 1A (passenger vehicle) equivalent | |||||
| Included accessories | Instruction manual × 1, mounting screw × 2 | |||||
| Input terminals | D-sub 9 pin MALE × 2 | |||||
| Operation mode | Supports switching between receive mode and measured value output mode | |||||
| Receive mode | No. of measurement channels: Max. 500 channels (max. 500 signals) | |||||
| Measured values output mode | Convert LR8450 measured values and output them as CAN frames. | |||||
| Protocols supported | CAN (ISO11898) CAN FD (ISO11898) CAN FD (non-ISO) | |||||
| Physical layer | ISO11898 (High Speed) | |||||
Produk Terkait
NON-CONTACT CAN SENSOR SP7001, SP7002
Key Features Acquire CAN FD/CAN data immediately, simply by pinching probes over wire insulation with one-hand Eliminate concerns by using non-contact sensing technology Use in a diverse array of development and evaluation applications that demand reliability
DIFFERENTIAL PROBE P9000
• Probe kompak untuk lingkungan CAT III 1000V • Mode gelombang: Mengamati bentuk gelombang sesaat • Mode RMS: Amati bentuk gelombang nilai RMS • Area penggunaan utama 1. Sirkuit baterai tegangan tinggi pada EV, HEV, dan mobil lain 2. Sirkuit bertegangan tinggi pada peralatan terkait energi seperti sel fotovoltaik 3. Sirkuit saluran listrik komersial (480 Vrms, dll.) 4. Suara lonjakan tegangan tinggi dari inverter, motor, solenoida, dll.
AC FLEXIBLE CURRENT SENSOR CT9667
Key Features Thinner cables are easy to use in confined spaces and with complicated wiring (-01, -02) Shaped so that it’s easy to route through complex wiring Easily supports large current measurements up to 5000 A Wide 10 Hz to 20 kHz band with excellent frequency characteristics Choose from three conductor diameter sizes Combine with Hioki power meters or Memory HiCorders (with BNC input terminals)
AC/DC CURRENT SENSOR CT6877
Key Features Combined accuracy with HIOKI power analyzer PW8001, PW6001 and PW3390 is specified. For details of combined accuracy, refer to the instruction manual. Measures high-current up to 2000 A for EV, HEV and other electric vehicles Improved noise resistance performance through a stronger shield lets you accurately measure current buried in noise High accuracy measurement realized through flat frequency characteristics and CMRR performance More enhanced environmental resistance performance than ever before lets you measure in -40 to 85°C situations Superior frequency characteristics of DC to 1 MHz (amplitude) Meet a wide range of applications from measuring battery charge/discharge to the secondary side of inverters in photovoltaic power generation and fuel cell evaluation, etc. Monitor waveforms when paired with oscilloscopes or Memory HiCorders and Sensor Unit